Ronseal One Coat Shed & Fence Protector Refill Pouch Forest Green 950ml

Ronseal One Coat Shed & Fence Protector. It does exactly what it says on the tin. Except, this one doesn’t come in a tin or a bucket, it comes in a pouch! It’s exactly the same as our ready-mixed One Coat Shed & Fence Protector buckets, the only difference is you just mix it with water at home. That means this little pouch is perfect for using as a refill.

No more buying multiple heavy buckets of One Coat Shed & Fence Protector, now just buy one bucket and replace your additional buckets with pouches. It’s easy to use, it can be brushed or sprayed on in one coat, and it’ll stand up to rain, frost, snow and sun, meaning you’ll get lasting colour and protection for 2 years. One 950ml pouch makes 5L of Shed & Fence Protector.

Product Features

• Lasting colour and protection for 2 years.
• Showerproof in one hour.
• One pouch makes 5L of paint.
• Protects in all weather conditions.
• Concentrated Pouch, 90% Less Plastic vs 5L Bucket.

Mix Up Your Paint!

1. Snip Pour the pouch into a bucket. Fill the pouch with water, reseal & shake.
2. Pour the pouch of water into the bucket. Mix well for 1 minute.
3. Add 3 more pouches of water by repeating each step, three times.
4. Stir bucket until colour is consistent.

That’s it, you’re ready to paint!

Before You Start

Wait for a warm, dry day (10°c). Clean your wood with a stiff brush. If your fence hasn’t been treated before, clean it with either a pressure washer or a suitable fence cleaner, then let the wood dry before painting. Cover anything you don’t want to get stain on. To check you’re happy with the colour, find a small hidden patch of wood to test on.

You’ll need more coats for contrasting colour changes. If you’re using this pouch to refill your ready-mixed One Coat, the colour may look different when it’s wet. But don’t worry, it’ll all look the same when it dries.

Application

       With A Brush

• After mixing, get lots of the stain on your brush, then brush on a thick coat. Brush in any drips. wipe any drips off plants or paving with soapy water before it dries.

       With A Sprayer

• Ensure it’s not too windy. Mix the stain in a bucket and pour it into the tank. Pump it up and start spraying. Use long, sweeping, horizontal arm movements and move along the full width of the panel. Drop down and do the same again, overlapping by about half. Clean any overspray with soapy water before it dries.

Clean Up

       Brush

• Remove excess stain from your brush. Clean it with warm soapy water. Don’t empy excess product into drains or water courses. Consult your local authority for any specials ways to get rid of waster product.

       Sprayer

• Remove excess stain from your sprayer. Rinse the sprayer, flush the hose, and clean the nozzle with warm, soapy water. See the sprayers manual for detailed instructions. Consult your local authority for any special ways to get rid of waster product.

Technical Specifications