Colas Bitukold Cold Joint Seal 15kg
£46.23 exc. VAT
Postcode Check
Enter your postcode to find nearby stores and to check if we can deliver to you.
About Colas
Colas offers a comprehensive range of high-performance materials tailored for road maintenance, civil engineering, and utility reinstatement projects. With over a century of expertise in bitumen emulsions and surface treatments, their product portfolio includes cold-lay asphalts like Bitucrete and Bitukold, rapid-setting mortars such as Colas C90 and HSC6, and thermoplastic solutions like Eurolines for durable road markings. These products are designed to meet the rigorous demands of modern infrastructure, ensuring longevity and safety in various applications.
Emphasizing sustainability and innovation, Colas integrates recycled materials into their asphalt mixes and continuously invests in research and development to enhance product performance. Their commitment to quality is evident in offerings like Premium 80, a polymer-modified bitumen emulsion approved for high-stress surface dressing, and Colas Resin 5, a fast-curing grouting resin ideal for heavy-duty applications . By combining technical excellence with environmental responsibility, Colas provides solutions that not only meet but exceed industry standards.
Product Description
Bitukold is a cold hand applied, thixotropic bitumen emulsion designed for sealing vertical joints. On small patches, Bitukold can also be used as a tack coat, thereby saving on the need to use a separate tack coat emulsion. Bitukold is mainly used for the protection of new joints in freshly laid asphalt or macadam.
Where to use?
- Transverse or longitudinal vertical joints.
- Trench reinstatements.
- Patch repairs.
- Drain or manhole frames and exposed ironwork.
- Kerb channels.
Preparation
Bitukold should not be applied in ambient temperatures of less than 5°C. Ensure surface is clean and free from loose material, oil, grease, standing water and weeds.
Application
A soft fibre or turks head brush should be used to apply the Bitukold. The brush must be dampened using clean water and any excess shaken off before commencing application. Then using a full brush of material, apply evenly in one direction, covering the whole face of the joint. In very hot weather application will be easier if the joint surface is slightly dampened.
In normal conditions, surfacing can commence within 15 minutes. The application of hot material rapidly completes the drying. Drying will be delayed in cold, damp and humid weather. Wash the brushes immediately after use with soapy water followed by Leoclean.
Coverage
On vertical joints 1.5kg/m² gives a dried film thickness of 1mm. For joints 50mm deep, a 15kg bucket covers approximately 200 linear metres of joint. Saw cutting the edge of the joint will maximise the rate of spread. As a tack coat in small patches and pot holes a spread rate of 0.25- 0.45kg/m² should be achieved.
Storage
Protect from frost or extremes of heat. Bitukold has a storage life of up to six months in sealed buckets under good storage conditions.
Standards
Bitukold complies with BS 594987 clause 6.8 Joints, and is suitable for jointing as required in Clause 903.22(iii) of the Specification of Highway Works.
